Page 1 of 1

M260 vs TM260

Posted: Fri Feb 17, 2012 6:57 am
by koutroullos
Γεια σας! Είμαι μεταξύ δύο transducers, του M260 και TM260 και θα ήθελα να ακούσω την γνώμη σας. Από οτι κατάλαβα το ΤΜ θα είναι πιο εύκολο να εγκατασταθεί από το Μ... Ξέρετε κάποιο που έχει τις γνώσεις για εγκατάσταση του Μ στην Κύπρο; Έχεται υπόψη το πόσο πιθανό να κοστίζει μια τέτοια εγκατάσταση; Από ότι κατάλαβα το Μ υστερεί στο ότι δεν μπορεί να μετρήσει θερμοκρασία νερού και είναι πιό δύσκολο να εγκατασταθεί και να μεταφερθεί σε καινούριο σκάφος (όταν αλλάξεις σκάφος).

Re: M260 vs TM260

Posted: Sun Feb 19, 2012 8:49 pm
by JiggingDude
The TM260 is a transom mount transducer & it's huuuuuuuuuuuuugggggggeeee.
If I remember correctly, you have a 1900 Maxum/inboard therefore, Imho the Tm 260 is not a good idea.
Nothing beats a through hull or in hull transducer if installed correctly. I'm talking from years of experience.
Take the M260 like I told you & don't worry about temperature since you can add a sensor for a few euros later. & if you decide
to install the M260 later in another boat, all you need is a replacement tank available everywhere for like 80-90 euros.
Talk to furuno in limassol to see if they can do the install for you & for how much.

Cheers.
Jiggindude

Re: M260 vs TM260

Posted: Sun Feb 19, 2012 9:14 pm
by koutroullos
Thanks David!